Air Stripping Towers | H2S (Hydrogen Sulfide) Packed Column Air Stripping Case Studies

Site Location: Orlando, Florida
Process Design: 9,000 gpm, 95% H₂S Removal
Equipment: (6) Model ΔS9-100F Air Stripper Towers

Delta Cooling Towers, Inc. was contracted by the City of Orlando, Florida to design and fabricate (6) six 9’-0” Diameter x 21’-0” high air stripping towers to treat potable water at the Econlackhatee Water Treatment Facility in Orlando, FL.  Each tower was designed to remove 95% of H₂S from 1,500gpm of well water.  The towers were supplied with a centrifugal blower designed to produce 9,500cfm at 3.6” w.c.  The blowers are rated at 20hp each, and were supplied with air filter assemblies and intake louvers to prevent the entry of contaminants into the air stripper.  All of the tower internals were factory installed by Delta simplifying the installation process.  Delta also supplied the ladder and cage assemblies to facilitate access to the manways for inspection and maintenance.

 
Site Location: St. Augustine, Florida
Process Design: 2,780 gpm, 90% H₂S Removal 
Equipment: (2) Model ΔS11-150RF Air Stripper Towers

Delta Cooling Towers, Inc. designed and fabricated (2) Two 11’-0” Diameter x 37’-2” high air stripping towers to treat potable water at the Water Treatment Plant site in St. Augustine, FL.  The air stripper shells were fabricated from NSF Approved Fiberglass Resin.  The towers were each supplied with a 30hp blower rated for 14,250cfm @ 3.5” W.C.  The blowers were supplied with air filter assemblies and intake louvers to prevent the entry of contaminants into the air strippers.  All of the tower internals were factory installed by Delta simplifying the installation process.  Delta also designed and fabricated the OSHA ladder and platform assemblies for ease of periodic inspection of the tower internals and packing media.

Site Location: Hollywood, Florida
Process Design: 2,100 gpm, 95% H₂S Removal 
Equipment: (2) Model ΔS7-080RF Air Stripper Towers

Delta Cooling Towers, Inc. designed and fabricated (2) Two 7’-0” Diameter x 20’-0” high air stripping towers to treat potable water at the Hollywood Seminole Water Treatment Plant site in Hollywood, FL.  The air stripper shells were fabricated from NSF Approved Fiberglass Resin.  The towers were each supplied with a 5.0hp blower rated for 4,215cfm @ 3.5” W.C.  The blowers were supplied with air filter assemblies and intake louvers to prevent the entry of contaminants into the air strippers.  All of the tower internals were factory installed by Delta simplifying the installation process.  Delta also designed and fabricated the OSHA ladder and platform assemblies for ease of periodic inspection of the tower internals and packing media.